Oxygen depletion monitoring for nitrogen and argon storage

Liquid nitrogen and argon do not poison anyone; they push the oxygen out of a room without any sign. An oxygen detector at breathing height near the entrance alarms at the door before someone walks into a depleted room, and reports over cellular.

Why oxygen depletion is the hazard here

Inert gases give no warning

Nitrogen and argon have no smell and no colour, and a depleted atmosphere gives no sensation of breathlessness before it disables.

Small rooms, large volumes

A litre of liquid nitrogen becomes hundreds of litres of gas, so a dewar or a leak can deplete a small room.

People work alone

Laboratories and freezer rooms are often entered by one person.

How the detection point is specified

Target gasOxygen (O2)
Selectable ranges0-30 / 0-100 %VOL
Mounting heightBreathing height, about 1.5 m, near the entry to the space
Where the detectors goAt breathing height near the room entrance; near dewars, tanks and freezers; outside the door, as a repeater alarm
OutputsTwo alarm relays, 4-20 mA and RS485 Modbus RTU, all at once
ReportingRS485 into a Genesis controller, then over cellular to alerts and a record

What happens when it alarms

The room acts first

The detector relays switch the fan, close the valve or sound the beacon locally, with no network involved.

Then people are told

The same reading goes over cellular to the people on the alert list, wherever they are, with acknowledgement recorded.

And the event is kept

Concentration, time and duration are kept on a record that exports to Excel, for the incident review and the next inspection.

Detectors and related pages

Frequently asked questions

Why measure oxygen and not nitrogen?

Because oxygen is what people need to breathe. An oxygen detector reports depletion whichever inert gas caused it.

Send us the gas points

Which gases, how many points, where they sit and what they report into. We come back with the cells, the ranges and the positions.

Talk to us →